Best Android apps for:
Blheli configurator
Welcome to the ultimate list of the best Android apps for the keyword Blheli Configurator! Blheli Configurator is a popular program that allows you to configure and fine-tune your electronic speed controller (ESC) settings for your multi-rotor model. Whether you're a beginner or a seasoned enthusiast, these apps will help you unleash the full potential of your ESCs. In this list, we have gathered the best Android apps for Blheli Configurator to make your search easier. Read on to find the right app for you! ...
The ESC can now use a wireless connection via the use of the HW WiFi express module for thefollowing operating systems ; iOS/Android phone (using the HW LINK APP) users can easily andremotely (without leaving the control stand) program the ESC...
Fly (and crash!) all you want regardless of rain, wind, sleet or snow. This simulator requires a high end device.Note that this is a RC flight simulator, not a game. You might find that the controls are hard, but that's because it's made...
SSHelper is an advanced, multi-protocol, secure server for the Android platform. SSHelper works just fine with a normal, unrooted Android device — i.e. your device. It also offers special features on rooted devices. SSHelper works as an...
This is an Ground Station for UAVs based on MultiWii and Naze32 boards.It displays all available data from a flight controller in a convenient way.It allows you to easily configure and tune your model from Android device, so you don't have to...
QGroundControl provides full flight control and configuration for ArduPilot or PX4 Pro powered vehicles. The goal for QGroundControl is improved ease of use for new users as well as high end feature support for experienced users. QGroundControl...
Andruav is an interconnected platform that uses Android mobile phones as Control Boards and Ground Control Stations for RC Vehicle. we strongly recommend to refer to documentation before downloading this application.and watch this video...
ZFlasher AVR - program for flash AVR microcontrollers. The application is based on avrdude - one of the best flasher. Your device must support USB Host (OTG), otherwise the program will not work. On devices with Android before 3.1 is required root...
Adaptive Tuner displays key gauge data: RPM, MAP, MAT, WAT, and AFR. It additionally presents the status of the 6 Adaptive Mode Learning State flags using a big visual graphic for each, alleviating the need to wire up LEDs if you use Adaptive...
This application is a Unlocker for EZ-GUI Ground Station Please make sure that EZ-GUI Ground Station works correctly on your device before buying the Unlocker.
Configuration tool for the MultiWii board. This is a tool to configure the settings of a Tricopter, Quadcopter, Hexacopter or Octocopter based on the MultiWii Project software. To use this tool it is required to have a Bluetooth dongle to connect...
This app allows you to flash new firmware in very easy way, directly from your Android device. Supported firmwares: -Cleanflight -Betaflight -iNav -RaceFlight -Triflight -Kiss FC Before you buy Premium version please check if it works for...
The RCDroidBox collects and processes telemetry data produced by RC systems in model planes but can also be used in other model types such as cars, etc. The RCDroidBox allows the user to watch and monitor the data when actually using the RC model....
Botlink provides automated drone control and safety features such as airspace alerts, manned aircraft avoidance and weather advisories, allowing operators to remain safe and compliant with complex flight regulations. Fewer buttons to push, a more...
A simple app that allows you to adjust your PIDs on the fly! Currently only supports PIDs, rates and RC rate/expo. Supports: - Cleanflight (API version 1.2.1+) - Betaflight (API version 1.2.1+) - RaceFlight (version 1.9.9) - KISS (version...
Proxy Server and protocol analyzer for MavLink compatible drones.MavLinkHUB delivers two core functionalities. As a proxy server - connects your drone (supported interfaces: USB (OTG) or Bluetooth) to the remote Ground Control Station using...
Public beta for LibrePilot2Go - The LibrePilot Mobile App Please check the wiki page for details: https://librepilot.atlassian.net/wiki/x/BgARAg . To discuss about the App, join us at https://forum.librepilot.org/index.php?board=24.0 . For News...
Lipo Safe is app that is meant to warn and give knowledge to people using Lipo batteries like me to remember how dangerous lipo batteries are. Also how people should store them and how to charge them properly to minimize possible injuries and house...
This app for checking and configuring gamepads and other input devices.Also you can rebind buttons and axes via .kl files (need root).Bluetooth/OTG Gamepads.Functions: - show pressed buttons and axes - create, read, write, delete .kl files - make...
CONFIGURATOR FOR KODI OFFICIAL Fully setup your Kodi android in one click with configurator for Kodi. Backup and restore to safeguard your Kodi against the unexpected. Top Kodi addons and build charts so you know...
Let's be updated with the newest FPV Drone Parts instantly, when they appears on Banggood! Main Features: - News by Category - News by Brand - Most Popular - Sales Components are organized by categories: Frames, Motors, ESC, Props, FC, PDB,...
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.APP currently only supports Bluetooth Low Energy Module. Not only for...
ZFlasher STM32 is a program for flashing STM32 microcontrollers. Your device must have support USB Host (OTG), otherwise the program will not work. Supported STM32 family: * STM32F05x / F03x / F04x / F07x / F09x * STM32F1 LD/MD/HD/XLD/CL/MD VL/HD...
The "WizardProg Mobile" (professional version application is "WizardProg Expert") application software designed to manage the programming operation for the universal portable USB-programmer TL866A/CS and other programmer models...
Easy flashing of STM32 Chipsets on the fly. Choose among several available DIY projects with available firmware to start with or flash your own firmware. It requires: - OTG-Cable - USB-To-Serial cable (see website) - Firmware from your favourite...
FuriousFPV develops its own application for FuriousFPV Dock-king Ground Station. Packed with many features and flexibilities, this application greatly enriches your FPV experience and helps simplify the configuration that you have to go through by...
This application allows you to view and record your smartport data in real time. Hardware is required to connect! You additionally need to connect signal inverter to taranis R9M smart port and then connect bluetooth module to it. Bluetooth module...
PIDflight Lap is the companion app for the PIDflight Lap Timing device (VTx) and compatible hardware. The PIDflight Lap Timing device utilises the signal strength of the video transmitter (VTx) installed on an FPV enabled multirotor as the timing...
SmartAP GCS is Powerful and Intuitive Software for Managing Drone Operations. CONFIGURE Integrated configurator allows you easily install and configure SmartAP Autopilot specifically for your vehicle type in less than 10 minutes...
You are now able to configure power level, frequency as well as HEATAWAY technology for the VTX Stealth Race via Bluetooth. Supported Equipment: - Furious FPV Stealth Race video transmitter. Features: - Select channels and bands - Turn on/off...
Best way to work with TRUE-D X from Furious FPV via Bluetooth. Furious FPV develops its owns application for TRUE-D X with many features and flexibilities. Ours application helps simplify the configuration that you have to go through by physically...
Configure your ESP8266 WiFi module with your Android device USB port. (USB OTG supported Android device, OTG cable and USB-RS232 converter required) Features: * Baudrate setting * Send AT command (AT) * Checks Version Information (AT+GMR) * Lists...
USB/BT Joystick Center is the only app that has an Unique Driver Editor & Programmable Byte Filter and can use Wii Remotes also with Android 5.1 and higher (also Android 10), PS4 / PS3 DualShock / Sixaxis (Wireless and without Root!) and...
This is proof of concept alpha version provided without a warranty, use it at your own risk. Many contemporary smartphones and tablets (Samsung Galaxy S3 and newer, Google Nexus 5 and newer and many others) offer a USB host feature. This means you...
Flashloader for some stm32 CPU. Using this application you can program stm32 CPU by ST-Link programmer. Your device must support USB-OTG Supported stm32 family - STM32F051x4/F051x6/F051x8/F030x8 - STM32F10xx Medium-density - STM32L100x8/L15xx8 -...
✦✦ Repositories for Android in Github is the app containing 700+ Repositories of Android divided over more than 15 categories which help you in developing your own android app and uploading as a play store app✦✦ From Image-view to...
Mission Planner for INAV has been designed to support all mission capabilities that INAV firmware offers. The mission can be planned in very intuitive and user friendly way. Features: - mission planning - survey missions planning - UVC camera...
Mobile flight is a ground station software designed to work mainly with INAV and MultiWii based firmwares. It supports all mission planning and FC configuration capabilities with follow me functions. At this time, we support mainly quadcopters...
This app is for configuring BLHeli_32 ESCs. The app requires that your device supports USB host mode (OTG). It supports the following USB connections to ESC(s): - USB connected flight controller (FC) that supports...
This is the Flyduino KISS FC app supporting KISS FC,CC and FCv2 flight controller. Full function of the desktop app including - activation of FC (internet access required) - flashing/configuration of KISS ESC - flashing FC (only v2 FC is supported...
A simple app to access the Betaflight CLI on your flight controller. You need Android device that supports OTG to use this app.
PIDflight VTx provides a simple interface to adjust your TrampHV or TBS Unify Pro video transmitter settings such as band, channel, power and pit mode. Flight controller firmware supporting VTx control: - Betaflight 3.1.0+ - Cleanflight 2.0.0+ -...
This app allows configuration of TBS Unify Pro or TrampHV video channels via your Beta Flight Flight controllers. By means of the USB interface of a mobile phone or tablet, the video transmitter can be configured. This is much more comfortable than...
Support your Cleanflight/Betaflight/INAV aircraft configure and monitor . App can be used to configure the general parameters, PID, OSD, receiver, ports, modes and channels of flight controller. App can backup your profile and restore it to the...
CLI tool for Betaflight and iNav with smart autocomplete and syntax highlighting. Main features: -syntax highlighting -autocomplete -syntax help -can be used with Betaflight and Inav -can connect through Bluetooth, WIFI, USB, SpeedyBee
This is a flight controller app used for a quadcopter in X-configuration. It is written for the Tiva C Series TM4C123G LaunchPad running at 80 MHz. More information can be found at the following blog posts:...
NEW UPDATE FOR SKYDRONE IS COMING REAL SOON & WILL BE AVAILABLE ON THE 10TH JUNE THE NEW UPDATE HAS A WHOLE BUNCH OF EXTRA FEATURES INCLUDING INTEGRATION WITH OUR (SKYCLOUD STORAGE APP). Skydrone Is a multi purpose Flight Controller...
Omnicomm Configurator is an application for configuring and calibrating of Omnicomm LLS fuel level sensors using a tablet computer. ATTENTION: To connect the UNU-USB to the tablet use a micro USB OTG adapter. The supported models...
The ImmersionRC Tramp uses NFC to program the video transmission frequency for racing drones. This utility enables most NFC-equipped Android phones to configure the Tramp.
The application is for the T3k Touch sensor setting program which is provided by Nuribom Co., Ltd. Please install the application when T3k Touch Sensor is connected. [Main Features] 1. Sensor Information - To check the Touch Sensor Firmware...